PP Compression 90° Elbow
PP compression 90° elbow is designed to change the direction of a compatible plastic pipeline by 90 degrees using two mechanical compression connections. It is suitable for irrigation, water distribution, landscaping and other compatible piping systems.
Material: Polypropylene (PP)
Jointing: Mechanical compression
Type: 90° elbow
Size Range: 20–110 mm
Available Models: 9
All Models & Specifications
Available PP compression 90° elbow sizes are listed below. Both compression ends use the same nominal pipe size.
| Size (mm) |
|---|
| 20 |
| 25 |
| 32 |
| 40 |
| 50 |
| 63 |
| 75 |
| 90 |
| 110 |
About PP Compression 90° Elbow
The PP compression 90° elbow provides a right-angle change of direction in a compatible plastic pipeline. Both ends use mechanical compression connections for pipes of the same outside diameter.
The correct model should be selected according to the outside diameter of the connected pipes and the project operating conditions.
About PP Compression Fittings
PP compression fittings are mechanical pipe fittings commonly used in water distribution, agricultural irrigation, landscaping and compatible utility piping systems. Their compression-joint design allows installation without fusion welding equipment.
A typical PP compression fitting uses a body, compression nuts, gripping components and sealing elements to create a mechanical pipe connection. Product selection should consider pipe outside diameter, fitting type, operating conditions, fluid medium and project requirements.
Product Details
Overview
The PP compression 90° elbow connects two same-size pipes while changing the pipeline direction by 90 degrees.
Product Features
- Polypropylene construction
- Two mechanical compression connections
- 90-degree direction change
- Equal-size configuration
- 9 listed sizes
- Size range from 20 to 110 mm
Applications & Installation
Typical Applications
Suitable for compatible water distribution, irrigation, landscaping, agricultural and utility piping systems where a 90-degree change in pipeline direction is required.
Installation
Cut both pipe ends square and clean the insertion areas. Insert each pipe into the matching compression connection, align the elbow to the required direction and tighten the compression nuts according to the fitting installation procedure.
Ordering Information
- Required pipe size
- Quantity for each model
- Application conditions if technical matching is required
- Delivery destination
Frequently Asked Questions
What is a PP compression 90° elbow used for?
It is used to connect two compatible pipes of the same size while changing the pipeline direction by 90 degrees.
Are both compression ends the same size?
Yes. The models listed on this page are equal 90° elbows with the same pipe size on both ends.
What sizes are listed?
The listed sizes are 20, 25, 32, 40, 50, 63, 75, 90 and 110 mm.
Need PP compression 90° elbows?
Send us your required sizes and quantities for quotation and lead-time confirmation.
Related Products
PP Compression Coupler
Straight equal-size compression fitting for compatible plastic pipes.
PP Compression Equal Tee
Equal-size compression tee for 90-degree branch connections.
PP Compression Male Threaded Tee
Compression tee with a male threaded branch connection.