PP Compression Equal Tee
PP compression equal tee is designed to create a 90-degree branch connection between three compatible plastic pipes of the same outside diameter using mechanical compression joints. It is suitable for irrigation, water distribution, landscaping and other compatible piping systems requiring an equal-size branch connection.
Material: Polypropylene (PP)
Jointing: Mechanical compression
Type: Equal tee
Size Range: 20–110 mm
Available Models: 9
All Models & Specifications
Available PP compression equal tee sizes are listed below. All three compression connections are the same nominal pipe size.
| Size (mm) |
|---|
| 20 |
| 25 |
| 32 |
| 40 |
| 50 |
| 63 |
| 75 |
| 90 |
| 110 |
About PP Compression Equal Tee
The PP compression equal tee provides a branch connection from a straight pipeline while keeping the same pipe diameter on the run and branch. It combines three mechanical compression connections in one fitting.
This fitting is useful where one equal-size branch must be taken from the main line. The selected model should match the outside diameter of all three connected pipes.
About PP Compression Fittings
PP compression fittings are mechanical pipe fittings commonly used in water distribution, agricultural irrigation, landscaping and compatible utility piping systems. Their compression-joint design allows installation without fusion welding equipment.
A typical PP compression fitting uses a body, compression nuts, gripping components and sealing elements to create a mechanical pipe connection. Product selection should consider pipe outside diameter, fitting type, operating conditions, fluid medium and project requirements.
Product Details
Overview
The PP compression equal tee connects three same-size pipes and creates a 90-degree branch from the main pipeline.
Product Features
- Polypropylene construction
- Three mechanical compression connections
- Equal-size branch configuration
- 90-degree branch connection
- 9 listed sizes
- Size range from 20 to 110 mm
Applications & Installation
Typical Applications
Suitable for compatible water distribution, irrigation, landscaping, agricultural and utility piping systems requiring an equal-size branch from the main line.
Installation
Cut the three pipe ends square and clean the insertion areas. Insert each pipe into the matching compression connection and tighten the nuts according to the fitting installation procedure, keeping the tee correctly aligned with the branch direction.
Ordering Information
- Required pipe size
- Quantity for each model
- Application conditions if technical matching is required
- Delivery destination
Frequently Asked Questions
What is a PP compression equal tee used for?
It is used to create a 90-degree branch connection between three compatible pipes of the same outside diameter.
Are all three connections the same size?
Yes. The models listed on this page are equal tees, so the run and branch connections use the same pipe size.
What sizes are currently listed?
The currently listed sizes are 20, 25, 32, 40, 50, 63, 75, 90 and 110 mm.
International Buyer & Sourcing Information
PP compression equal tees are commonly sourced by plastic-pipe distributors, irrigation wholesalers and water-system contractors for equal-size branch connections. For bulk or export orders, buyers should specify the pipe size, quantity and destination market.
Need PP compression equal tees?
Send us your required sizes and quantities for quotation and lead-time confirmation.
Related Products
PP Compression Coupler
Straight equal-size compression fitting for compatible plastic pipes.
PP Compression Reducing Coupler
Reducing compression fitting for transitions between different pipe sizes.
PP Compression Male Threaded Adapter
Compression adapter with a male threaded transition connection.