PP Compression End Cap
PP compression end cap is designed to close the end of a compatible plastic pipeline using a mechanical compression connection. It is suitable for irrigation, water distribution, landscaping and other compatible piping systems where a secure removable pipe-end closure is required.
Material: Polypropylene (PP)
Jointing: Mechanical compression
Type: End cap
Size Range: 20–110 mm
Available Models: 9
All Models & Specifications
Available PP compression end cap sizes are listed below. Select the model according to the outside diameter of the pipe to be closed.
| Size (mm) |
|---|
| 20 |
| 25 |
| 32 |
| 40 |
| 50 |
| 63 |
| 75 |
| 90 |
| 110 |
About PP Compression End Cap
The PP compression end cap provides a mechanical closure for the end of a compatible plastic pipe. It is useful for terminating a pipeline, closing an unused branch or temporarily sealing an installation during construction or system modification.
The correct model should be selected according to the outside diameter of the pipe. The compression connection allows installation without fusion welding equipment.
About PP Compression Fittings
PP compression fittings are mechanical pipe fittings commonly used in water distribution, agricultural irrigation, landscaping and compatible utility piping systems. Their compression-joint design allows installation without fusion welding equipment.
A typical PP compression fitting uses a body, compression nut, gripping components and sealing elements to create a mechanical pipe connection. Product selection should consider pipe outside diameter, fitting type, operating conditions, fluid medium and project requirements.
Product Details
Overview
The PP compression end cap terminates a compatible plastic pipeline with a mechanical compression connection.
Product Features
- Polypropylene construction
- Mechanical compression connection
- Pipe-end closure
- 9 listed sizes
- Size range from 20 to 110 mm
- No fusion welding equipment required for assembly
Applications & Installation
Typical Applications
Suitable for compatible water distribution, irrigation, landscaping, agricultural and utility piping systems where the end of a pipe must be closed.
Installation
Cut the pipe end square and clean the insertion area. Insert the pipe into the compression end cap according to the fitting design and tighten the compression nut following the installation procedure.
Ordering Information
- Required pipe size
- Quantity for each model
- Application conditions if technical matching is required
- Delivery destination
Frequently Asked Questions
What is a PP compression end cap used for?
It is used to close the end of a compatible plastic pipe with a mechanical compression connection.
Does installation require fusion welding?
No fusion welding equipment is required for the compression assembly itself.
What sizes are listed?
The listed sizes are 20, 25, 32, 40, 50, 63, 75, 90 and 110 mm.
Need PP compression end caps?
Send us your required sizes and quantities for quotation and lead-time confirmation.
Related Products
PP Compression Coupler
Straight equal-size compression fitting for compatible plastic pipes.
PP Compression 90° Elbow
Compression elbow for 90-degree pipeline direction changes.
PP Compression Reducing Coupler
Reducing compression fitting for transitions between different pipe sizes.