HDPE Butt Fusion 45° Elbow
PE100 HDPE butt fusion 45° elbow for changing pipeline direction by 45 degrees in water supply, irrigation and industrial piping systems. Butt fusion creates a strong, continuous welded joint between the fitting and PE pipe. Explore our Plastic Piping Systems for more HDPE fittings and related products.
Material: PE100 HDPE
Jointing: Butt fusion welding
SDR options: SDR11 / SDR13.6 / SDR17
Standards: ISO 4427-3 / EN 12201-3 / GB/T 13663
Dimensions
Available size range for HDPE butt fusion 45° elbows. Please specify the required size, SDR rating and quantity when requesting a quotation.
| Size (mm) | Available SDR |
|---|---|
| 63 | 11 / 13.6 / 17 |
| 75 | 11 / 13.6 / 17 |
| 90 | 11 / 13.6 / 17 |
| 110 | 11 / 13.6 / 17 |
| 125 | 11 / 13.6 / 17 |
| 140 | 11 / 13.6 / 17 |
| 160 | 11 / 13.6 / 17 |
| 180 | 11 / 13.6 / 17 |
| 200 | 11 / 13.6 / 17 |
| 225 | 11 / 13.6 / 17 |
| 250 | 11 / 13.6 / 17 |
| 280 | 11 / 13.6 / 17 |
| 315 | 11 / 13.6 / 17 |
| 355 | 11 / 13.6 / 17 |
| 400 | 11 / 13.6 / 17 |
| 450 | 11 / 13.6 / 17 |
| 500 | 11 / 13.6 / 17 |
| 560 | 11 / 13.6 / 17 |
| 630 | 11 / 13.6 / 17 |
| 710 | 11 / 13.6 / 17 |
| 800 | 11 / 13.6 / 17 |
Product Details
Overview
The 45° elbow is designed for changing the direction of an HDPE pipeline by 45 degrees. It is suitable for PE100 piping systems where a smooth directional transition is required.
Ordering Information
- Required size in mm
- Required SDR rating
- Quantity for each size
- Applicable standard or project specification
- Delivery destination and required lead time
We will confirm availability, pricing and estimated lead time before order placement.
Applications & Installation
Typical Applications
Water distribution, irrigation networks, industrial PE piping and other HDPE systems requiring a 45-degree direction change.
Butt Fusion Jointing
Pipe and fitting ends are aligned, faced, heated and fused under controlled pressure using a compatible butt fusion welding machine.
Project Selection
Match the fitting size, SDR and material specification with the connected PE pipe and the engineering requirements of the system.
Frequently Asked Questions
What material is the 45° elbow made from?
The fitting is made from PE100 HDPE for butt fusion piping systems.
Which SDR ratings are available?
Available SDR options include SDR11, SDR13.6 and SDR17.
What information is needed for a quotation?
Please send the required size, SDR, quantity, applicable standard and delivery destination.
Send us your required sizes and quantities
Get a quote for your project. We’re ready to help with your sourcing requirements.
Related Products
90° Elbow
HDPE butt fusion elbow for changing pipe direction by 90 degrees.
Equal Tee
HDPE butt fusion tee for connecting three pipes of the same diameter.
Reducing Coupler
HDPE butt fusion fitting for connecting pipes of different outside diameters.