HDPE Butt Fusion 90° Elbow
PE100 HDPE butt fusion 90° elbow for changing pipeline direction by 90 degrees in water supply, irrigation and industrial piping systems. Butt fusion creates a continuous welded joint between the fitting and PE pipe. Explore our Plastic Piping Systems for more HDPE fittings and related products.
Material: PE100 HDPE
Jointing: Butt fusion welding
SDR options: SDR11 / SDR13.6 / SDR17, subject to size and order confirmation
Standards: ISO 4427-3 / EN 12201-3 / GB/T 13663
Dimensions
Available size range for HDPE butt fusion 90° elbows. Please specify the required size, SDR rating and quantity when requesting a quotation.
| Size (mm) | Available SDR |
|---|---|
| 63 | 11 / 13.6 / 17 |
| 75 | 11 / 13.6 / 17 |
| 90 | 11 / 13.6 / 17 |
| 110 | 11 / 13.6 / 17 |
| 125 | 11 / 13.6 / 17 |
| 140 | 11 / 13.6 / 17 |
| 160 | 11 / 13.6 / 17 |
| 180 | 11 / 13.6 / 17 |
| 200 | 11 / 13.6 / 17 |
| 225 | 11 / 13.6 / 17 |
| 250 | 11 / 13.6 / 17 |
| 280 | 11 / 13.6 / 17 |
| 315 | 11 / 13.6 / 17 |
| 355 | 11 / 13.6 / 17 |
| 400 | 11 / 13.6 / 17 |
| 450 | 11 / 13.6 / 17 |
| 500 | 11 / 13.6 / 17 |
| 560 | 11 / 13.6 / 17 |
| 630 | 11 / 13.6 / 17 |
| 710 | 11 / 13.6 / 17 |
| 800 | 11 / 13.6 / 17 |
Product Details
Overview
The 90° elbow is used where an HDPE pipeline needs a right-angle change in direction. The fitting is joined to compatible PE pipe by butt fusion, producing a homogeneous welded connection without threaded or mechanical joints.
For project supply, select the nominal outside diameter and confirm the SDR or pressure class required by the pipeline design and purchase specification.
Ordering Information
- Required nominal OD in mm
- Required SDR rating or pressure class
- Quantity for each size
- Applicable standard or project specification
- Delivery destination and required lead time
We will confirm the suitable product specification, availability and quotation before order placement.
Applications & Installation
Typical Applications
Water distribution, irrigation networks, industrial PE piping and other HDPE systems requiring a 90-degree direction change.
Butt Fusion Jointing
Pipe and fitting ends are aligned, faced, heated and fused under controlled pressure using a compatible butt fusion welding machine.
Project Selection
Match the fitting OD, SDR and material specification with the connected PE pipe and the engineering requirements of the system.
Frequently Asked Questions
What material is the 90° elbow made from?
The fitting is supplied in PE100 HDPE for butt fusion piping systems.
Which SDR ratings are available?
SDR11, SDR13.6 and SDR17 are available within the product range, with the final SDR option confirmed according to fitting size and project requirement.
What information should I send for a quotation?
Please send the required nominal OD, SDR or pressure class, quantity, applicable standard and delivery destination.
Send us your required sizes and quantities
Get a quotation for HDPE butt fusion 90° elbows and related PE fittings for your project.
Related Products
Reducing Coupler
HDPE butt fusion fitting for connecting pipes of different outside diameters.
Equal Tee
HDPE butt fusion tee for connecting three pipes of the same diameter.
Long Spigot Stub End
Long-spigot HDPE stub end for flanged connections with a backing ring.