Electrofusion Tapping Tee

Electrofusion tapping tee is designed to create a branch outlet on a compatible polyethylene pipeline using an electrofusion saddle connection. It provides a practical branch solution for water supply, irrigation and other compatible PE piping applications.

All Models & Specifications

Available models and dimensions are listed below. The size format is main pipe diameter × branch outlet diameter. Dimensions L, A, B, H and d correspond to the technical drawing available in the image switcher above.

dn/dn1	L	A	B	H	d
63×20	115	100	52	122	4.7
63×25	115	100	52	122	4.7
63×32	115	100	65	122	4.7
75×20	115	100	52	122	4.7
75×25	115	100	52	122	4.7
75×32	115	100	65	122	4.7
90×20	130	143	56	145	4.7
90×25	130	143	56	145	4.7
90×32	130	143	56	185	4.7
90×40
90×63	140	140	85	185	4.7
110×20	130	155	55	145	4.7
110×25	130	155	55	145	4.7
110×32	130	155	60	150	4.7
110×40	145	160	63	180	4.7
110×50	145	160	61	177	4.7
110×63	140	155	73	200	4.7
125×25	130	155	55	145	4.7
125×63	140	155	73	200	4.7
160×25	142	199	66	169	4.7
160×32	142	197	72	169	4.7
160×50	190	240	85	235	4.7
160×63	190	240	80	235	4.7
160×90	190	240	125	235	4.7
180×25	142	199	66	169	4.7
200×63	190	250	85	235	4.7
200×90	190	250	120	235	4.7
225×32	193	253	65	235	4.7
225×63	190	250	85	235	4.7
225×90	190	250	120	235	4.7
250×63	190	305	91	250	4.7
250×90	190	305	118	250	4.7
280×63	190	305	91	250	4.7
280×90	190	305	118	250	4.7
315×63	190	315	85	250	4.7
315×90	190	315	155	250	4.7

Note: Dimensional values for 90×40 were not provided and are left blank.

About Electrofusion Tapping Tee

The electrofusion tapping tee is used to form a branch connection from a polyethylene main pipe. The saddle base is positioned on the main pipe and joined using the electrofusion process, while the outlet provides the required branch connection.

Model selection should be based on both the main pipe diameter and the required branch outlet size. For example, 110×63 indicates a 110 mm main pipe connection with a 63 mm branch outlet.

Product Details

Applications & Installation

Frequently Asked Questions

How should I specify the tapping tee size?

Specify the main pipe diameter first and the branch outlet diameter second, for example 160×63.

What does d represent in the table?

The “d” column corresponds to the dimension marked d on the technical drawing. The listed value is 4.7 for the models where dimensional data was provided.

Are dimensions available for the 90×40 model?

The 90×40 model is listed, but its L, A, B, H and d values were not provided in the current specification data.

Related Products