Material: PE100 HDPE

Jointing: Electrofusion welding

Pressure classes: SDR11 / PN16 & SDR17 / PN10

Size range: 20–800 mm

Standards: ISO 4427-3 / EN 12201-3 / GB/T 13663

Welding data: Barcode / electronic welding data

Terminals: 4.0 mm / 4.7 mm

Overview

The electrofusion equal tee creates a three-way branch connection while keeping the same pipe outside diameter on all three ends. The embedded heating element produces a welded PE joint after correct scraping, cleaning, alignment and electrofusion processing.

Product Features

• PE100 HDPE body
• Equal three-way branch connection
• SDR11 / PN16 and selected SDR17 / PN10 models
• Barcode and electronic welding data
• Welding indicator for visual confirmation
• 4.0 mm and 4.7 mm terminal options

Typical Applications

Suitable for water supply networks, irrigation systems, industrial PE pipelines, water treatment projects and other pressure piping installations requiring an equal-size branch connection.

Electrofusion Preparation

Cut the pipe square, scrape the oxidation layer across each insertion area, clean the prepared surfaces, align and clamp the fitting without stress, then weld using the barcode or specified welding data. Allow the joint to cool fully before removing clamps or applying load.

Ordering Information

• Required size in mm
• Required pressure class
• Quantity for each model
• Applicable project standard
• Delivery destination