PE-RT II Butt Fusion Equal Tee
PE-RT II butt fusion equal tee is designed to create a 90-degree branch connection with the same nominal pipe size on all three ends. The available size range covers 63 mm to 315 mm.
Material: PE-RT II
Jointing: Butt fusion welding
Type: Equal Tee
Size Range: 63–315 mm
Available Models: 11
All Models & Specifications
Available PE-RT II butt fusion equal tee sizes are listed below.
| Size (mm) |
|---|
| 63 |
| 75 |
| 90 |
| 110 |
| 125 |
| 160 |
| 180 |
| 200 |
| 225 |
| 250 |
| 315 |
About PE-RT II Butt Fusion Equal Tee
PE-RT II butt fusion equal tee creates a 90-degree branch from the main pipeline while keeping the same outside diameter on the run and branch connections. It is used where one PE-RT II line needs to divide into two equal-size flow paths.
The fitting is butt fused on all three ends and is suitable for branch points in heating distribution, hot-water circulation, HVAC hydronic and other compatible PE-RT II piping systems. All three connected pipes should match the listed tee size.
About PE-RT II Material
PE-RT II (Polyethylene of Raised Temperature Resistance Type II) is a thermoplastic polyethylene material developed for piping systems that must maintain mechanical strength at elevated temperatures. Compared with conventional polyethylene, PE-RT II offers improved long-term temperature resistance while retaining the advantages of a weldable plastic piping material.
Because PE-RT II remains thermoplastic, compatible pipes and fittings can be joined by butt fusion or electrofusion to create a continuous all-plastic pipeline system. The material is also valued for corrosion resistance, resistance to internal scaling, relatively low weight, smooth internal surfaces and good installation flexibility.
Operating Temperature
PE-RT II is intended for hot- and cold-water and heating applications where elevated-temperature performance is required. The exact allowable temperature depends on the pipe and fitting design, SDR or wall thickness, operating pressure and the specified application class. Many PE-RT II piping systems are designed for long-term service in approximately the 70–80°C range, while short-term or maximum design conditions can reach about 95°C. The final temperature and pressure limits should always be confirmed against the actual pipe specification and project design conditions.
Typical Applications
- Secondary district-heating and heat-distribution networks
- Building heating and hot-water circulation systems
- Radiant heating and underfloor heating systems
- HVAC hydronic heating and cooling circuits
- Heat-pump and geothermal circulation systems
- Compatible industrial hot-water and thermal-fluid pipelines
- Other hot- and cold-water piping applications requiring a corrosion-resistant welded plastic system
Selection Considerations
For project selection, the required pipe outside diameter, SDR or wall thickness, design pressure, normal operating temperature, maximum temperature, fluid medium and installation method should be confirmed together. This is especially important for heating networks because allowable pressure changes with operating temperature and the intended service life.
Product Details
Overview
The PE-RT II butt fusion equal tee provides an equal-size branch connection for compatible PE-RT II piping systems. All three outlets use the same nominal outside diameter.
Product Features
- PE-RT II construction
- Butt fusion jointing
- Equal-diameter three-way connection
- 90-degree branch configuration
- Sizes from 63 to 315 mm
Applications & Installation
Typical Applications
Used in compatible PE-RT II piping systems requiring an equal-size 90-degree branch, including heating and hot-water pipeline installations.
Butt Fusion Jointing
Prepare, face and align the pipe and fitting ends, then carry out butt fusion using compatible welding equipment and the applicable project installation procedure.
Ordering Information
- Required size
- Quantity for each size
- Project operating conditions if required
- Delivery destination
Frequently Asked Questions
What sizes are available?
The listed sizes are 63, 75, 90, 110, 125, 160, 180, 200, 225, 250 and 315 mm.
What is the largest listed size?
The maximum listed size is 315 mm.
What information should I send for a quotation?
Please send the required sizes, quantities and delivery destination so we can confirm availability, pricing and lead time.
International Buyer & Sourcing Information
PE-RT II butt fusion equal tees are commonly sourced for equal-size branch connections in compatible PE-RT II piping systems. They are relevant to heating, plumbing and pipe-distribution buyers. Specify pipe size, quantity and destination market.
Need PE-RT II butt fusion equal tees?
Send us your required sizes and quantities for quotation and lead-time confirmation.
Related Products
PE-RT II Butt Fusion Reducing Tee
Reducing butt-fusion tee for smaller branch connections from a PE-RT II main.
PE-RT II Butt Fusion 90° Elbow
Butt-fusion elbow for 90-degree direction changes in PE-RT II pipelines.
PE-RT II Butt Fusion Reducing Coupler
Butt-fusion reducer for straight transitions between different PE-RT II pipe sizes.